Water Treatment Chemical Chlorine Dioxide Generator Flow Rate Control 50g/H

• After-sales Service: Lifetime Paid Service After The Warranty Period
• Warranty: 1 Year
• Certification: ISO9001, CE
• Model NO.: CPF-50D1X
• Application: Industry
• Voltage: 220V
• Disinfection Method: Chlorine Dioxide
• Control Mode: Manual / Flow Auto-Control
• Raw Chemical: Naclo2, HCl
• Reactor Material: Titanium Alloy
• Shell Material: PVC
• Transport Package: Plywood Box
• Specification: 50 grams per hour
• Trademark: Waterman
• Origin: Made in China
• HS Code: 8419200000
• Production Capacity: 4, 000 PCS/Year

Product Description

Product Description

Place of Origin: Jiangsu, China (Mainland)
Model: CPF-50D1X
Capacity: 50 grams per hour
Certification: ISO9001, CE Marked
EINECS No. 233-162-8
CAS NO. 10049-04-4
Control Mode: Manual / linkage / Flow auto-control
Installation Method: Wall-mounted or vertical
Power Supply: 220V/50Hz
 

Detailed Photos

 

Product Parameters

Main parameters:1. Operating voltage: AC220V plus or minus 10%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage / Flow auto-control                     Low liquid level alarm function                    Timing start / stop function
                    Alarm remote transfer

5 NaClO₂ + 4HCl = 4ClO₂ + 5NaCl + 2H₂O
NaClO₂: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid
Two raw chemicals of NaClO₂ and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO₂ solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.

The highest outlet pressure of ClO₂ solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO₂ can be adjusted manually or automatically by receiving 4-20mA signal sent by flow rate sensor.